美国密理博混合纤维素过滤膜MF-Millipore 表面滤膜SSWP04700sswp04700

美国密理博混合纤维素过滤膜MF-Millipore 表面滤膜SSWP04700

简要描述:
美国密理博混合纤维素过滤膜MF-Millipore 表面滤膜SSWP04700。说明:MF-Millipore 表面滤膜,混合纤维素酯,亲水,3.0 µm,47 mm,白色,光面。不含 Triton 表面活性剂的 MF-Millipore 滤膜包含极少量的润湿剂,其水溶出物比标准的 MF-Millipore 滤膜低。

美国密理博混合纤维素过滤膜MF-Millipore 表面滤膜SSWP04700

说明:MF-Millipore 表面滤膜,混合纤维素酯,亲水,3.0 µm,47 mm,白色,光面

商标名:MF-Millipore

数量/包装:100

滤膜材质:Mixed Cellulose Esters

滤膜商标名:MF-Millipore

折射率:1.495

水通量,mL/min x cm2:320

23 °C 时的泡点:≥0.7 bar

zui高操作温度,°C:75

可润湿性:亲水

滤膜直径,mm:47

滤膜代码:SSWP

滤膜颜色:白色

产品名称:MF-Millipore 表面滤膜

滤膜表面:光面

重量分析溶出物,%:6

厚度,µm:180

空气流速,L/min x cm2:30

孔隙率 %:83

WHATMAN G/C玻璃纤维滤纸1822-090现货供应1822-090

WHATMAN G/C玻璃纤维滤纸1822-090现货供应

简要描述:
WHATMAN G/C玻璃纤维滤纸1822-090现货供应。Grade GF/C:1.2um。保留细小颗粒,有很好的流速。在世界许多地方,这是用于收集饮用水和天然、工业废水中的悬浮物的标准滤纸。快速而有效地澄清含小到中等细小颗粒的水溶液。当需要更高负载的时候,广泛地用于细胞培养、液闪计数和结合分析方面。

WHATMAN G/C玻璃纤维滤纸1822-090现货供应

Grade GF/C:1.2µm
保留细小颗粒,有很好的流速。在世界许多地方,这是用于收集饮用水和天然、工业废水中的悬浮物的标准滤纸。快速而有效地澄清含小到中等细小颗粒的水溶液。当需要更高负载的时候,广泛地用于细胞培养、液闪计数和结合分析方面。无粘结剂,细小颗粒截留好,流速快,常作为检测饮用水和天然、工业废水的标准滤膜,还用于气相色谱样品前处理、细胞培养、液闪计数和免疫结合诊断试剂盒开发。

WHATMAN G/C玻璃纤维滤纸1822-090现货供应技术参数:

等级: Grade GF/C1)
液体中的颗粒保留: 1.2μm
过滤速度: 中等偏快
气体流速: 6.7 s/100ml/in²
常规厚度: 260μm
基本重量: 53g/m²
材质: 硼硅酸玻璃
属性特点: 高负载力
黏合剂类型: 无黏合剂

订购信息:

1822-021 GF/C 2.1CM 100/PK
1822-024 GF/C 2.4CM 100/PK
1822-025 GF/C 2.5CM 100/PK
1822-037 GF/C 3.7CM 100/PK
1822-042 GF/C 4.25CM 100/PK
1822-047 GF/C 4.7CM 100/PK
1822-050 GF/C 5CM 100/PK
1822-055 GF/C 5.5CM 100/PK
1822-070 GF/C 7CM 100/PK
1822-090 GF/C 9CM 100/PK
1822-100 GF/C 10CM 100/PK
1822-110 GF/C 11CM 100/PK
1822-125 GF/C 12.5CM 100/PK
1822-150 GF/C 15CM 100/PK
1822-185 GF/C 18.5CM 100/PK
1822-320 GF/C 32CM 100/PK
1822-6580 GF/C 2.5CM 400/PK
1822-849 GF/C 10.2×25.4CM 50/PK
1822-866 GF/C 8x10IN 100/PK
1822-915 GF/C 46x57CM 25/PK
1822-9916 GF/C 10CM INDIV PACK 100/PK

密理博EZ-Pak 无菌滤膜(微生物检测)47mm*0.45um孔径EZHAWG474

密理博EZ-Pak 无菌滤膜(微生物检测)47mm*0.45um孔径

简要描述:
密理博EZ-Pak 无菌滤膜(微生物检测)47mm*0.45um孔径。每盒4组,每组150片,每片相互连接,与自动取膜器配套使用。滤膜为无菌单独包装,直径47mm,孔径0.45um,白色网格滤膜

密理博EZ-Pak 无菌滤膜(微生物检测)47mm*0.45um孔径EZHAWG474

说明:EZ-Pak 滤膜,0.45µm 47mm 白色网格

商标名:EZ-Pak

数量/包装:4 组,每组 150 片滤膜

应用:一般微生物分析

滤膜材质:Mixed Cellulose Esters

滤膜商标名:MF-Millipore

滤膜孔径,µm:0.45

滤膜直径,mm:47

滤膜颜色:白色

产品名称:EZ-Pak 滤膜

滤膜表面:网格

无菌:无菌

细胞凋亡试剂盒(PE和7-ADD标记)PE Annexin V Apoptosis DetectioBD 559763

细胞凋亡试剂盒(PE和7-ADD标记)PE Annexin V Apoptosis Detectio

简要描述:
NameAnnexin V : PE Apoptosis Detection Kit IContentsAnnexin V-PE, 7-AAD, and Annexin V Binding BufferSize100 TestsRegulatory Status RUO

*,现货*格优惠,咨询

 Technical Data Sheet

PE Annexin V Apoptosis Detection Kit I

Product Information

Material Number: 559763

Component: 51-66121E

Description: 10X Annexin V Binding Buffer

Size: 50 ml (1 ea)

Storage Buffer: Aqueous buffered solution containing no preservative.

Component: 51-68981E

Description: 7-AAD

Size: 2.0 ml (1 ea)

Vol. per Test: 5 μl

Storage Buffer: Aqueous buffered solution containing fetal bovine serum and ≤0.09% sodium

azide.

Component: 51-65875X

Description: PE Annexin V

Size: 0.5 ml (1 ea)

Vol. per Test: 5 μl

Storage Buffer: Aqueous buffered solution containing BSA and ≤0.09% sodium azide.

Description

Apoptosis is a normal physiologic process which occurs during embryonic development as well as in maintenence of tissue homeostasis. The

apoptotic program is characterized by certain morphologic features, including loss of plasma membrane asymmetry and attachment,

condensation of the cytoplasm and nucleus, and internucleosomal cleavage of DNA. Loss of plasma membrane is one of the earliest features.

In apoptotic cells, the membrane phospholipid phosphatidylserine (PS) is translocated from the inner to the outer leaflet of the plasma

membrane, thereby exposing PS to the external cellular environment. Annexin V is a 35-36 kDa Ca2+ dependent phospholipid-binding

protein that has a high affinity for PS, and binds to cells with exposed PS. Annexin V may be conjugated to fluorochromes including

Phycoerythrin (PE). This format retains its high affinity for PS and thus serves as a sensitive probe for flow cytometric analysis of cells that are

undergoing apoptosis. Since externalization of PS occurs in the earlier stages of apoptosis, PE Annexin V staining can identify apoptosis at an

earlier stage than assays based on nuclear changes such as DNA fragmentation.

PE Annexin V staining precedes the loss of membrane integrity which accompanies the latest stages of cell death resulting from either

apoptotic or necrotic processes. Therefore, staining with PE Annexin V is typically used in conjunction with a vital dye such as

7-Amino-Actinomycin (7-AAD) to allow the investigator to identify early apoptotic cells (7-AAD negative, PE Annexin V positive). Viable

cells with intact membranes exclude 7-AAD, wheras the membranes of dead and damaged cells are permeable to 7-AAD. For example, cells

that are considered viable are PE Annexin V and 7-AAD negative; cells that are in early apoptosis are PE Annexin V positive and 7-AAD

negative; and cells that are in late apoptosis or already dead are are both PE Annexin V and 7-AAD positive. This assay does not distinguish

between cells that have undergone apoptotic death versus those that have died as a result of a necrotic pathway because in either case, the dead

cells will stain with both PE Annexin V and 7-AAD. However, when apoptosis is measured over time, cells can be often tracked from PE

Annexin V and 7-AAD negative (viable, or no measurable apoptosis), to PE Annexin V positive and 7-AAD negative (early apoptosis,

membrane integrity is present) and finally to PE Annexin V and 7-AAD positive (end stage apoptosis and death). The movement of cells

through these three stages suggests apoptosis. In contrast, a single observation indicating that cells are both PE Annexin V and 7-AAD

positive, in of itself, reveals less information about the process by which the cells underwent their demise.

559763 Rev. 8 Page 1 of 3

Flow Cytometric Analysis of PE Annexin V staining. Jurkat cells

(Human T-cell leukemia; ATCC TIB-152) were left untreated (top

panels) or treated for 4 hours with 4 μM Camptothecin (bottom

panels). Cells were incubated with PE Annexin V in a buffer

containing 7-Amino-Actinomycin (7-AAD) and analyzed by flow

cytometry. Untreated cells were primarily PE Annexin V and 7-AAD

negative, indicating that they were viable and not undergoing

apoptosis. After a 4 hour treatment (bottom panels), there were

primarily two populations of cells: Cells that were viable and not

undergoing apoptosis (PE Annexin V and 7-AAD negative); cells

undergoing apoptosis (PE Annexin V positive and 7-AAD negative).

A minor population of cells were observed to be PE Annexin V and

7-AAD positive, indicating that they were in end stage apoptosis or

already dead.

Preparation and Storage

Store undiluted at 4°C and protected from prolonged exposure to light. Do not freeze.

Application Notes

Application

Flow cytometry Routinely Tested

Recommended Assay Procedure:

PE Annexin V is a sensitive probe for identifying apoptotic cells, binding to negatively charged phospholipid surfaces (Kd of ~5 x 10^-2) with a

higher affinity for phosphatidylserine (PS) than most other phospholipids. PE Annexin V binding is calcium dependent and defined calcium and

salt concentrations are required for optimal staining as described in the PE Annexin V Staining Protocol. Investigators should note that PE

Annexin V flow cytometric analysis on adherent cell types (e.g HeLa, NIH 3T3, etc.) is not routinely tested as specific membrane damage

may occur during cell detachment or harvesting. Methods for utilizing Annexin V for flow cytometry on adherent cell types, however,

have been previously reported (Casiola-Rosen et al. and van Engelend et al.).

INDUCTION OF APOPTOSIS BY CAMPTOTHECIN

The following protocol is provided as an illustration on how PE Annexin V may be used on a cell line (Jurkat).

Materials

1. Prepare Camptothecin stock solution (Sigma-Aldrich Cat. No. C-9911): 1 mM in DMSO.

2. Jurkat T cells (ATCC TIB-152).

Procedure

1. Add Camptothecin (final conc. 4-6 μM) to 1 x 10^6 Jurkat cells.

2. Incubate the cells for 4-6 hr at 37°C.

3. Proceed with the PE Annexin V Staining Protocol to measure apoptosis.

PE ANNEXIN V STAINING PROTOCOL

PE Annexin V is used to quantitatively determine the percentage of cells within a population that are actively undergoing apoptosis. It relies on

the property of cells to lose membrane asymmetry in the early phases of apoptosis. In apoptotic cells, the membrane phospholipid

phosphatidylserine (PS) is translocated from the inner leaflet of the plasma membrane to the outer leaflet, thereby exposing PS to the external

environment. Annexin V is a calcium-dependent phospholipid-binding protein that has a high affinity for PS, and is useful for identifying

apoptotic cells with exposed PS. 7-Amino-Actinomycin (7-AAD) is a standard flow cytometric viability probe and is used to distinguish viable

from nonviable cells. Viable cells with intact membranes exclude 7-AAD, whereas the membranes of dead and damaged cells are permeable to

7-AAD. Cells that stain positive for PE Annexin V and negative for 7-AAD are undergoing apoptosis. Cells that stain positive for both PE

Annexin V and 7-AAD are either in the end stage of apoptosis, are undergoing necrosis, or are already dead. Cells that stain negative for both PE

Annexin V and 7-AAD are alive and not undergoing measurable apoptosis.

559763 Rev. 8 Page 2 of 3

Reagents

1. PE Annexin V (component no. 51-65875X): Use 5 μl per test.

2. 7-Amino-Actinomycin (7-AAD) (component no. 51-68981E) is a convenient, ready-to-use nucleic acid dye. Use 5 μl per test.

3. 10X Annexin V Binding Buffer (component no. 51-66121E): 0.1 M Hepes/NaOH (pH 7.4), 1.4 M NaCl, 25 mM CaCl2. For a 1X working

solution, dilute 1 part of the 10X Annexin V Binding Buffer to 9 parts of distilled water.

Staining

1. Wash cells twice with cold PBS and then resuspend cells in 1X Binding Buffer at a concentration of 1 x 10^6 cells/ml.

2. Transfer 100 μl of the solution (1 x 10^5 cells) to a 5 ml culture tube.

3. Add 5 μl of PE Annexin V and 5 μl 7-AAD.

4. Gently vortex the cells and incubate for 15 min at RT (25°C) in the dark.

5. Add 400 μl of 1X Binding Buffer to each tube. Analyze by flow cytometry within 1 hr.

SUGGESTED CONTROLS FOR SETTING UP FLOW CYTOMETRY

The following controls are used to set up compensation and quadrants:

1. Unstained cells.

2. Cells stained with PE Annexin V (no 7-AAD).

3. Cells stained with 7-AAD (no PE Annexin V).

Other Staining Controls:

A cell line that can be easily induced to undergo apoptosis should be used to obtain positive control staining with PE Annexin V and/or PE

Annexin V and 7-AAD. It is important to note that the basal level of apoptosis and necrosis varies considerably within a population. Thus, even in

the absence of induced apoptosis, most cell populations will contain a minor percentage of cells that are positive for apoptosis (PE Annexin V

positive, 7-AAD negative or PE Annexin V positive, 7-AAD positive).

The untreated population is used to define the basal level of apoptotic and dead cells. The percentage of cells that have been induced to undergo

apoptosis is then determined by subtracting the percentage of apoptotic cells in the untreated population from percentage of apoptotic cells in the

treated population. Since cell death is the eventual outcome of cells undergoing apoptosis, cells in the late stages of apoptosis will have a damaged

membrane and stain positive for 7-AAD as well as for PE Annexin V. Thus the assay does not distinguish between cells that have already

undergone an apoptotic cell death and those that have died as a result of necrotic pathway, because in either case the dead cells will stain with

both PE Annexin V and 7-AAD.

Product Notices

This reagent has been pre-diluted for use at the recommended Volume per Test. We typically use 1 × 10^6 cells in a 100-μl experimental

sample (a test).

1.

2. Source of all serum proteins is from USDA inspected abattoirs located in the United States.

Caution: Sodium azide yields highly toxic hydrazoic acid under acidic conditions. Dilute azide compounds in running water before

discarding to avoid accumulation of potentially explosive deposits in plumbing.

3.

4. Please refer to www.bdbiosciences.com/pharmingen/protocols for technical protocols.

References

Andree HA, Reuingsperger CP, Hauptmann R, Hemker HC, Hermens WT, Willems GM. Binding of vascular anticoagulant alpha (VAC alpha) to planar

phospholipid bilayers. J Biol Chem. 1990; 265(9):4923-4928. (Biology)

Casciola-Rosen L, Rosen A, Petri M, Schlissel M. Surface blebs on apoptotic cells are sites of enhanced procoagulant activity: implications for coagulation events

and antigenic spread in systemic lupus erythematosus. Proc Natl Acad Sci U S A. 1996; 93(4):1624-1629. (Biology)

Homburg CH, de Haas M, von dem Borne AE, Verhoeven AJ, Reuingsperger CP, Roos D. Human neutrophils lose their surface Fc gamma RIII and acquire

Annexin V binding sites during apoptosis in vitro. Blood. 1995; 85(2):532-540. (Biology)

Koopman G, Reuingsperger CP, Kuijten GA, Keehnen RM, Pals ST, van Oers MH. Annexin V for flow cytometric detection of phosphatidylserine expression on

B cells undergoing apoptosis. Blood. 1994; 84(5):1415-1420. (Biology)

Martin SJ, Reuingsperger CP, McGahon AJ, et al. Early redistribution of plasma membrane phosphatidylserine is a general feature of apoptosis regardless of

the initiating stimulus: inhibition by overexpression of Bcl-2 and Abl. J Exp Med. 1995; 182(5):1545-1556. (Biology)

Raynal P, Pollard HB. Annexins: the problem of assessing the biological role for a gene family of multifunctional calcium- and phospholipid-binding proteins.

Biochim Biophys Acta. 1994; 1197(1):63-93. (Biology)

van Engeland M, Ramaekers FC, Schutte B, Reuingsperger CP. A novel assay to measure loss of plasma membrane asymmetry during apoptosis of adherent

cells in culture. Cytometry. 1996; 24(2):131-139. (Biology)

Vermes I, Haanen C, Steffens-Nakken H, Reuingsperger C. A novel assay for apoptosis. Flow cytometric detection of phosphatidylserine expression on early

apoptotic cells using fluorescein labelled Annexin V. J Immunol Methods. 1995; 184(1):39-51. (Biology)

559763

BD细胞凋亡试剂盒FITC Annexin V Apoptosis Detection Kit IBD556547

BD细胞凋亡试剂盒FITC Annexin V Apoptosis Detection Kit I

简要描述:
ContentsAnnexin V-FITC, Propidium Iodide Staining Solution, Annexin V Binding BufferSize100 TestsRegulatory Status RUO
*,*,*,咨询

 Description

Apoptosis is a normal physiologic process which occurs during embryonic development as well as in maintenence of tissue homeostasis. The

apoptotic program is characterized by certain morphologic features, including loss of plasma membrane asymmetry and attachment,

condensation of the cytoplasm and nucleus, and internucleosomal cleavage of DNA. Loss of plasma membrane is one of the earliest features.

In apoptotic cells, the membrane phospholipid phosphatidylserine (PS) is translocated from the inner to the outer leaflet of the plasma

membrane, thereby exposing PS to the external cellular environment. Annexin V is a 35-36 kDa Ca2+ dependent phospholipid-binding

protein that has a high affinity for PS, and binds to cells with exposed PS. Annexin V may be conjugated to fluorochromes including FITC.

This format retains its high affinity for PS and thus serves as a sensitive probe for flow cytometric analysis of cells that are undergoing

apoptosis. Since externalization of PS occurs in the earlier stages of apoptosis, FITC Annexin V staining can identify apoptosis at an earlier

stage than assays based on nuclear changes such as DNA fragmentation.

FITC Annexin V staining precedes the loss of membrane integrity which accompanies the latest stages of cell death resulting from either

apoptotic or necrotic processes. Therefore, staining with FITC Annexin V is typically used in conjunction with a vital dye such as propidium

iodide (PI) or 7-Amino-Actinomycin (7-AAD) to allow the investigator to identify early apoptotic cells (PI negative, FITC Annexin V

positive). Viable cells with intact membranes exclude PI, wheras the membranes of dead and damaged cells are permeable to PI. For example,

cells that are considered viable are FITC Annexin V and PI negative; cells that are in early apoptosis are FITC Annexin V positive and PI

negative; and cells that are in late apoptosis or already dead are are both FITC Annexin V and PI positive. This assay does not distinguish

between cells that have undergone apoptotic death versus those that have died as a result of a necrotic pathway because in either case, the dead

cells will stain with both FITC Annexin V and PI. However, when apoptosis is measured over time, cells can be often tracked from FITC

Annexin V and PI negative (viable, or no measurable apoptosis), to FITC Annexin V positive and PI negative (early apoptosis, membrane

integrity is present) and finally to FITC Annexin V and PI positive (end stage apoptosis and death). The movement of cells through these three

stages suggests apoptosis. In contrast, a single observation indicating that cells are both FITC Annexin V and PI positive, in of itself, reveals

less information about the process by which the cells underwent their demise.

Preparation and Storage

Store undiluted at 4°C and protected from prolonged exposure to light. Do not freeze.

556547 Rev. 5 Page 1 of 3

Flow Cytometric Analysis of FITC Annexin V staining. Jurkat cells

(Human T-cell leukemia; ATCC TIB-152) were left untreated (top

panels) or treated for 4 hours with 12 μM campotothecin (bottom

panels). Cells were incubated with FITC Annexin V in a buffer

containing propidium iodide (PI) and analyzed by flow cytometry.

Untreated cells were primarily FITC Annexin V and PI negative,

indicating that they were viable and not undergoing apoptosis. After a

4 hour treatment (bottom panels), there were primarily two

populations of cells: Cells that were viable and not undergoing

apoptosis (FITC Annexin V and PI negative) and cells undergoing

apoptosis (FITC Annexin V positive and PI negative). A minor

population of cells were observed to be FITC Annexin V and PI

positive, indicating that they were in end stage apoptosis or already

dead.

Application Notes

Application

Flow cytometry Routinely Tested

Recommended Assay Procedure:

FITC Annexin V is a sensitive probe for identifying apoptotic cells, binding to negatively charged phospholipid surfaces (Kd of ~5 x 10^-2) with

a higher affinity for phosphatidylserine (PS) than most other phospholipids. FITC Annexin V binding is calcium dependent and defined calcium

and salt concentrations are required for optimal staining as described in the FITC Annexin V Staining Protocol. Investigators should note that

FITC Annexin V flow cytometric analysis on adherent cell types (e.g HeLa, NIH 3T3, etc.) is not routinely tested as specific membrane

damage may occur during cell detachment or harvesting. Methods for utilizing Annexin V for flow cytometry on adherent cell types,

however, have been previously reported (Casiola-Rosen et al. and van Engelend et al.).

INDUCTION OF APOPTOSIS BY CAMPTOTHECIN

The following protocol is provided as an illustration on how FITC Annexin V may be used on a cell line (Jurkat).

Materials

1. Prepare Camptothecin stock solution (Sigma-Aldrich Cat. No. C-9911): 1 mM in DMSO.

2. Jurkat T cells (ATCC TIB-152).

Procedure

1. Add Camptothecin (final conc. 4-6 μM) to 1 x 10^6 Jurkat cells.

2. Incubate the cells for 4-6 hr at 37°C.

3. Proceed with the FITC Annexin V Staining Protocol to measure apoptosis.

FITC ANNEXIN V STAINING PROTOCOL

FITC Annexin V is used to quantitatively determine the percentage of cells within a population that are actively undergoing apoptosis. It relies on

the property of cells to lose membrane asymmetry in the early phases of apoptosis. In apoptotic cells, the membrane phospholipid

phosphatidylserine (PS) is translocated from the inner leaflet of the plasma membrane to the outer leaflet, thereby exposing PS to the external

environment. Annexin V is a calcium-dependent phospholipid-binding protein that has a high affinity for PS, and is useful for identifying

apoptotic cells with exposed PS. Propidium Iodide (PI) is a standard flow cytometric viability probe and is used to distinguish viable from

nonviable cells. Viable cells with intact membranes exclude PI, whereas the membranes of dead and damaged cells are permeable to PI. Cells that

stain positive for FITC Annexin V and negative for PI are undergoing apoptosis. Cells that stain positive for both FITC Annexin V and PI are

either in the end stage of apoptosis, are undergoing necrosis, or are already dead. Cells that stain negative for both FITC Annexin V and PI are

alive and not undergoing measurable apoptosis.

556547 Rev. 5 Page 2 of 3

Reagents

1. FITC Annexin V (component no. 51-65874X): Use 5 μl per test.

2. Propidium Iodide (PI) (component no. 51-66211E) is a convenient, ready-to-use nucleic acid dye. Use 5 μl per test.

3. 10X Annexin V Binding Buffer (component no. 51-66121E): 0.1 M Hepes/NaOH (pH 7.4), 1.4 M NaCl, 25 mM CaCl2. For a 1X working

solution, dilute 1 part of the 10X Annexin V Binding Buffer to 9 parts of distilled water.

Staining

1. Wash cells twice with cold PBS and then resuspend cells in 1X Binding Buffer at a concentration of 1 x 10^6 cells/ml.

2. Transfer 100 μl of the solution (1 x 10^5 cells) to a 5 ml culture tube.

3. Add 5 μl of FITC Annexin V and 5 μl PI.

4. Gently vortex the cells and incubate for 15 min at RT (25°C) in the dark.

5. Add 400 μl of 1X Binding Buffer to each tube. Analyze by flow cytometry within 1 hr.

SUGGESTED CONTROLS FOR SETTING UP FLOW CYTOMETRY

The following controls are used to set up compensation and quadrants:

1. Unstained cells.

2. Cells stained with FITC Annexin V (no PI).

3. Cells stained with PI (no FITC Annexin V).

Other Staining Controls:

A cell line that can be easily induced to undergo apoptosis should be used to obtain positive control staining with FITC Annexin V and/or FITC

Annexin V and PI. It is important to note that the basal level of apoptosis and necrosis varies considerably within a population. Thus, even in the

absence of induced apoptosis, most cell populations will contain a minor percentage of cells that are positive for apoptosis (FITC Annexin V

positive, PI negative or FITC Annexin V positive, PI positive).

The untreated population is used to define the basal level of apoptotic and dead cells. The percentage of cells that have been induced to undergo

apoptosis is then determined by subtracting the percentage of apoptotic cells in the untreated population from percentage of apoptotic cells in the

treated population. Since cell death is the eventual outcome of cells undergoing apoptosis, cells in the late stages of apoptosis will have a damaged

membrane and stain positive for PI as well as for FITC Annexin V. Thus the assay does not distinguish between cells that have already undergone

an apoptotic cell death and those that have died as a result of necrotic pathway, because in either case the dead cells will stain with both FITC

Annexin V and PI.

Product Notices

1. Since applications vary, each investigator should titrate the reagent to obtain optimal results.

2. Source of all serum proteins is from USDA inspected abattoirs located in the United States.

Caution: Sodium azide yields highly toxic hydrazoic acid under acidic conditions. Dilute azide compounds in running water before

discarding to avoid accumulation of potentially explosive deposits in plumbing.

3.

4. Please refer to www.bdbiosciences.com/pharmingen/protocols for technical protocols.

References

Andree HA, Reuingsperger CP, Hauptmann R, Hemker HC, Hermens WT, Willems GM. Binding of vascular anticoagulant alpha (VAC alpha) to planar

phospholipid bilayers. J Biol Chem. 1990; 265(9):4923-4928. (Biology)

Casciola-Rosen L, Rosen A, Petri M, Schlissel M. Surface blebs on apoptotic cells are sites of enhanced procoagulant activity: implications for coagulation events

and antigenic spread in systemic lupus erythematosus. Proc Natl Acad Sci U S A. 1996; 93(4):1624-1629. (Biology)

Homburg CH, de Haas M, von dem Borne AE, Verhoeven AJ, Reuingsperger CP, Roos D. Human neutrophils lose their surface Fc gamma RIII and acquire

Annexin V binding sites during apoptosis in vitro. Blood. 1995; 85(2):532-540. (Biology)

Koopman G, Reuingsperger CP, Kuijten GA, Keehnen RM, Pals ST, van Oers MH. Annexin V for flow cytometric detection of phosphatidylserine expression on

B cells undergoing apoptosis. Blood. 1994; 84(5):1415-1420. (Biology)

Martin SJ, Reuingsperger CP, McGahon AJ, et al. Early redistribution of plasma membrane phosphatidylserine is a general feature of apoptosis regardless of

the initiating stimulus: inhibition by overexpression of Bcl-2 and Abl. J Exp Med. 1995; 182(5):1545-1556. (Biology)

O'Brien MC, Bolton WE. Comparison of cell viability probes compatible with fixation and permeabilization for combined surface and intracellular staining in flow

cytometry. Cytometry. 1995; 19(3):243-255. (Biology)

Raynal P, Pollard HB. Annexins: the problem of assessing the biological role for a gene family of multifunctional calcium- and phospholipid-binding proteins.

Biochim Biophys Acta. 1994; 1197(1):63-93. (Biology)

Schmid I, Krall WJ, Uittenbogaart CH, Braun J, Giorgi JV. Dead cell discrimination with 7-amino-actinomycin D in combination with dual color immunofluorescence

in single laser flow cytometry. Cytometry. 1992; 13(2):204-208. (Biology)

van Engeland M, Ramaekers FC, Schutte B, Reuingsperger CP. A novel assay to measure loss of plasma membrane asymmetry during apoptosis of adherent

cells in culture. Cytometry. 1996; 24(2):131-139. (Biology)

Vermes I, Haanen C, Steffens-Nakken H, Reuingsperger C. A novel assay for apoptosis. Flow cytometric detection of phosphatidylserine expression on early

apoptotic cells using fluorescein labelled Annexin V. J Immunol Methods. 1995; 184(1):39-51. (Biology)

556547

 

WHATMAN 41号定量滤纸1441-8661441-047

WHATMAN 41号定量滤纸1441-866

简要描述:
WHATMAN 41号定量滤纸1441-866,Grade 41:20um,流速Z快的无灰滤纸,推荐用于诸如氢氧化铝或者氢氧化铁的分析过程中。也用于大颗粒或凝胶状沉淀物的过滤,并用于空气污染定量分析中快流速测定气态化合物。这种滤纸可选用用于一次性过滤漏斗中,这种方便的一次性47mm过滤漏斗,Z大过滤量250ml,上面的47mm 41级别滤纸可以很容易取出用于进一步的分析或培养。

WHATMAN 41号定量滤纸1441-866

Grade 41:20µm

流速zui快的无灰滤纸,推荐用于诸如氢氧化铝或者氢氧化铁的分析过程中。也用于大颗粒或凝胶状沉淀物的过滤,比如铁矿中铁含量、镁矿中镁含量测定时过滤应用,还常作为环境空气污染物的测定,如悬浮颗粒物、气态化合物(如氟化物)等采样,或过滤消解溶液做光谱、色谱或质谱分析,如苦味酸浊度、食品中果胶酸等测定,41号滤纸还是标准泪液检测试纸的基体。该滤纸可用于一次性过滤漏斗中,这种方便的一次性47 mm过滤漏斗,zui大过滤量250 ml(产品编号1920-1441),47 mm Grade 41滤纸可以很容易取出用于进一步的分析和培养

无灰级:Grade 40至44zui高灰份含量为0.007%;Grade 589zui高灰份含量为0.01%。这些是非常纯的滤纸,适用于各种关键分析过滤程序。

WHATMAN 41号定量滤纸1441-866技术参数:

等级: Grade 41
形状: 圆片
类型: 无灰级
常规厚度: 220μm
基本重量: 85g/m²)
过滤速度(Herzberg): 54s
空气流速: 3.4s/100mL/in²
灰分含量: 0.007%²)
拉伸模量/干式 27.2 N/15 mm
材质: 优质棉绒
zui低α纤维素含量: 0.98%

订购信息:

1441-042 GR 41 4.25CM 100/PK
1441-047 GR 41 4.7CM 100/PK
1441-050 GR 41 5CM 100/PK
1441-055 GR 41 5.5CM 100/PK
1441-060 GR 41 6CM 100/PK
1441-070 GR 41 7CM 100/PK
1441-090 GR 41 9CM 100/PK
1441-110 GR 41 11CM 100/PK
1441-125 GR 41 12.5CM 100/PK
1441-150 GR 41 15CM 100/PK
1441-185 GR 41 18.5CM 100/PK
1441-240 GR 41 24CM 100/PK
1441-320 GR 41 32CM 100/PK
1441-6309 GR 41 2.5CM 10000/PK
1441-6624 GR 41 8.1CM 100/PK
1441-866 GR 41 20.3×25.4CM 100/PK
1441-917 GR 41 46x57CM 100/PK

PALL(颇尔)142mm聚醚砜过滤膜0.8um(Supor 800 Membrane)60114

PALL(颇尔)142mm聚醚砜过滤膜0.8um(Supor 800 Membrane)

简要描述:
PALL(颇尔)142mm聚醚砜过滤膜0.8um(Supor 800 Membrane)60114。60114:142 mm, tabbed25/pkg;聚醚砜材质过滤膜,0.8um孔径

PALL(颇尔)142mm聚醚砜过滤膜0.8um(Supor 800 Membrane)60114

减少过滤时间;极适用于生物制药和除菌过滤
PALL(颇尔)142mm聚醚砜过滤膜0.8um(Supor 800 Membrane)60114特点:
• 的流速和处理量提高了过滤速度。
• 蛋白吸附低,兼容性好。
• 高处理量节省时间和经费。
• 产品经伽玛射线灭菌,可高温高压灭菌。
60114订货信息:

Part Number Description Pkg CN
Supor 100 Membrane Disc Filters, 0.1 µm
60309 25 mm, plain 100/pkg
60310 47 mm, plain 100/pkg
60311 90 mm, plain 100/pkg
60312 142 mm, tabbed 25/pkg
66551 142 mm, no tab 25/pkg
60313 293 mm, tabbed 25/pkg
66552 293 mm, no tab 25/pkg
Supor 200 Membrane Disc Filters, 0.2 µm
60298 13 mm, plain 100/pkg
60300 25 mm, plain 100/pkg
60301 47 mm, plain 100/pkg
66234 47 mm, grid, individual sterile pack (S-Pack) 200/pkg
60334 90 mm, plain 100/pkg
66549 142 mm, no tab 25/pkg
60305 142 mm, tabbed 25/pkg
60307 293 mm, tabbed 25/pkg
66550 293 mm, no tab 25/pkg
Supor 450 Membrane Disc Filters, 0.45 µm
60170 13 mm, plain 100/pkg
60172 25 mm, plain 100/pkg
60173 47 mm, plain 100/pkg
61854 47 mm, grid 100/pkg
60043 47 mm, grid, individual-gamma irradiated pack (S-pack) 200/pkg
60174 50 mm, plain 100/pkg
60206 90 mm, plain 100/pkg
60177 142 mm, tabbed 25/pkg
66553 142 mm, no tab 25/pkg
60179 293 mm, tabbed 25/pkg
66554 293 mm, no tab 25/pkg
Supor 800 Membrane Disc Filters, 0.8 µm
60109 25 mm, plain 100/pkg
60110 47 mm, plain 100/pkg
65472 47 mm, grid, sterile 200/pkg
60112 90 mm, plain 100/pkg
60114 142 mm, tabbed 25/pkg
66555 142 mm, no tab 25/pkg
60116 293 mm, tabbed 25/pkg
66556 293 mm, no tab 25/pkg

Millipore混合纤维素MCE过滤膜0.1um孔径过滤膜VCWP04700VCWP04700

Millipore混合纤维素MCE过滤膜0.1um孔径过滤膜VCWP04700

简要描述:
Millipore混合纤维素MCE过滤膜0.1um孔径过滤膜VCWP04700.Millipore 表面滤膜成为分析和研究应用中Z广为使用的膜之一。 不含 Triton 表面活性剂的 MF-Millipore 滤膜包含极少量的润湿剂,其水溶出物比标准的 MF-Millipore 滤膜低。

Millipore混合纤维素MCE过滤膜0.1um孔径过滤膜VCWP04700

说明:MF-Millipore 表面滤膜,混合纤维素酯,亲水,0.1 µm,47 mm,白色,光面

商标名:MF-Millipore

数量/包装:100

应用:DNA 和蛋白质微量透析

滤膜材质:Mixed Cellulose Esters

滤膜商标名:MF-Millipore

折射率:1.5

水通量,mL/min x cm2:1.5

23 °C 时的泡点:≥14.1

zui高操作温度,°C:75

滤膜类型:表面滤膜

滤膜孔径,µm:0.1

可润湿性:亲水

滤膜直径,mm:47

滤膜代码:VCWP

滤膜颜色:白色

产品名称:MF-Millipore 表面滤膜

滤膜表面:光面

重量分析溶出物,%:1.5

厚度,µm:105

空气流速,L/min x cm2:0.4

孔隙率 %:74

不含 Triton® 表面活性剂的 MF-Millipore 滤膜包含极少量的润湿剂,其水溶出物比标准的 MF-Millipore 滤膜低。

Millipore混合纤维素MCE过滤膜0.1um孔径过滤膜VCWP04700技术指标

颜色:白色或黑色
表面:光面或网格
可湿性:亲水
灭菌方法:高温高压灭菌(121 °C, 1 bar)、EO 或 γ 射线灭菌
使用温度:55 °C zui大
蛋白结合:150 µg/cm2
细菌内毒 素:8.0 EU/mL 
重量溶出物:< 1.0%

Millipore滤膜SMWP04700优势供应,5um水系滤膜SMWP04700价格SMWP04700

Millipore滤膜SMWP04700优势供应,5um水系滤膜SMWP04700价格

简要描述:
Millipore滤膜SMWP04700优势供应,5um水系滤膜SMWP04700价格。醋酸纤维素和xiao suan纤维素的混合物不具有生物活性,使 MF-Millipore 表面滤膜成为分析和研究应用中Z广为使用的膜之一。 不含 Triton 表面活性剂的 MF-Millipore 滤膜包含极少量的润湿剂,其水溶出物比标准的 MF-Millipore 滤膜低。

Millipore滤膜SMWP04700优势供应,5um水系滤膜SMWP04700价格

说明:MF-Millipore 表面滤膜,混合纤维素酯,亲水,5.0 µm,47 mm,白色,光面

商标名:MF-Millipore

数量/包装:100

滤膜材质:Mixed Cellulose Esters

滤膜商标名:MF-Millipore

折射率:1.495

水通量,mL/min x cm2:580

23 °C 时的泡点:≥0.42 bar

zui高操作温度,°C:75

滤膜类型:表面滤膜

滤膜孔径,µm:5.0

可润湿性:亲水

滤膜直径,mm:47

滤膜代码:SMWP

滤膜颜色:白色

产品名称:MF-Millipore 表面滤膜

滤膜表面:光面

重量分析溶出物,%:6

厚度,µm:160

空气流速,L/min x cm2:32

孔隙率 %:84

Millipore滤膜SMWP04700优势供应,5um水系滤膜SMWP04700价格技术指标

颜色:白色或黑色
表面:光面或网格
可湿性:亲水
灭菌方法:高温高压灭菌(121 °C, 1 bar)、EO 或 γ 射线灭菌
使用温度:55 °C zui大
蛋白结合:150 µg/cm2
细菌内毒 素:8.0 EU/mL 
重量溶出物:< 1.0%

5um聚碳酸酯过滤膜TMTP01300,13mm径迹蚀刻膜PC膜5umTMTP01300

5um聚碳酸酯过滤膜TMTP01300,13mm径迹蚀刻膜PC膜5um

简要描述:
5um聚碳酸酯过滤膜TMTP01300,13mm径迹蚀刻膜PC膜5um。Isopore 表面滤膜是在聚碳酸酯表面径迹蚀刻而成,推荐用于所有需要通过光学或电子显微镜技术对空气中的污染物及其它颗粒进行观察分析时使用。 Isopore 表面滤膜具有光滑的,像玻璃一样的表面,可以进行清晰的样品观察。

5um聚碳酸酯过滤膜TMTP01300,13mm径迹蚀刻膜PC膜5um

说明:Isopore 表面滤膜,聚碳酸酯,亲水,5.0 µm,13 mm,白色,光面

商标名:Isopore

数量/包装:100

滤膜材质:Polycarbonate

滤膜商标名:Isopore

折射率:1.6

zui高操作温度,°C:140

滤膜类型:表面滤膜

滤膜孔径,µm:5.0

可润湿性:亲水

滤膜直径,mm:13

Air Flow Rate, L/min x cm2/psi:50

Water Flow Rate, mL/min x cm2/psi:250

滤膜代码:TMTP

滤膜颜色:白色

产品名称:Isopore 表面滤膜

滤膜表面:光面

重量分析溶出物,%:<1

厚度,µm:20

孔隙率 %:5–20

美国PALL黑色网格滤膜47mm直径0.45um孔径66585微生物检测66585

美国PALL黑色网格滤膜47mm直径0.45um孔径66585微生物检测

简要描述:
美国PALL黑色网格滤膜47mm直径0.45um孔径66585微生物检测。66585 0.45um,47mm带格栅 独立无菌包装 200片/盒,黑色

美国PALL黑色网格滤膜47mm直径0.45um孔径66585微生物检测

Metricel Black 圆形膜片(黑色)

 用于微生物分析和颗粒分析的对比膜

特别适用于分离和计算酵母和霉菌总数
还可用于食物和饮料质量控制实验中对微生物检测和识别
以及用来监测工艺流体中的颗粒污染,如微电子业。

 

l        颗粒和微生物分析用反差膜片

l        深底色更便于白色菌落和浅色颗粒的计数。亲水型改性聚醚砜可高温高压灭菌。

l        *的点状格栅设计不影响菌落生长。

l        膜片与格栅的高反差易于显微观察和计数。

l        可提供单独灭菌包装。

 美国PALL黑色网格滤膜47mm直径0.45um孔径66585微生物检测特点:

l        过过滤介质:亲水型改性聚醚砜

l        孔径:0.45um,0.8um

l        直径:47mm

l        标准厚度:152um

l        消毒方法:可高温高压灭菌。

订购信息:
Metricel Black Membrane Disc Filters
60138    0.45 µm, 25 mm, grid100/pkg
60065    0.8 µm, 25 mm, grid100/pkg
66585    0.45 µm, 47 mm, grid, S-pack, sterile200/pkg
66586    0.45 µm, 47 mm, grid100/pkg
66587    0.8 µm, 47 mm, grid, S-pack, sterile200/pkg
66588    0.8 µm, 47 mm, grid100/pkg

 

密理*0mm有机过滤膜现货供应,密理博PVDF有机过滤膜HVLP09050优势代理HVLP09050

密理*0mm有机过滤膜现货供应,密理博PVDF有机过滤膜HVLP09050优势代理

简要描述:
密理*0mm有机过滤膜现货供应,密理博PVDF有机过滤膜HVLP09050优势代理。Durapore 表面滤膜具有高流速高通量、低溶出以及广泛的化学相容性。 亲水性 Durapore 表面滤膜的蛋白质吸附能力远低于尼龙、 PTFE 膜。

密理*0mm有机过滤膜现货供应,密理博PVDF有机过滤膜HVLP09050优势代理

Durapore 表面滤膜具有高流速高通量、低溶出以及广泛的化学相容性。 亲水性 Durapore 表面滤膜的蛋白质吸附能力远低于尼龙、PTFE 膜。

说明:Durapore 表面滤膜,PVDF,亲水,0.45 µm,90 mm,白色,光面
商标名:Durapore
数量/包装:50
应用:澄清过滤生物溶液
滤膜材质:Hydrophilic PVDF
滤膜商标名:Durapore®
折射率:1.42
水通量,mL/min x cm2:29
23 °C 时的泡点:≥1.55
zui高操作温度,°C:85
滤膜类型:表面滤膜
滤膜孔径,µm:0.45
可润湿性:亲水
滤膜直径,mm:90
滤膜代码:HVLP
滤膜颜色:白色
产品名称:Durapore 表面滤膜
滤膜表面:光面
重量分析溶出物,%:0.5
厚度,µm:125
空气流速,L/min x cm2:4
孔隙率 %:70

 

密理*0mm有机过滤膜现货供应,密理博PVDF有机过滤膜HVLP09050优势代理技术指标:

颜色:白色
表面:光面
厚度:125 µm
灭菌方法:高温高压灭菌(121 °C,1 bar)、EO 或 γ 射线
操作温度:85 °C 
细菌内毒素:0.5 EU/mL 
重量溶出物:< 0.5%

Millipore聚碳酸酯过滤膜(PC膜径迹蚀刻膜)8um孔径TETP04700TETP04700

Millipore聚碳酸酯过滤膜(PC膜径迹蚀刻膜)8um孔径TETP04700

简要描述:
Millipore聚碳酸酯过滤膜(PC膜径迹蚀刻膜)8um孔径TETP04700,Isopore 表面滤膜是在聚碳酸酯表面径迹蚀刻而成,推荐用于所有需要通过光学或电子显微镜技术对空气中的污染物及其它颗粒进行观察分析时使用。 Isopore 表面滤膜具有光滑的,像玻璃一样的表面,可以进行清晰的样品观察。

 Millipore聚碳酸酯过滤膜(PC膜径迹蚀刻膜)8um孔径TETP04700

Isopore 表面滤膜是在聚碳酸酯表面径迹蚀刻而成,推荐用于所有需要通过光学或电子显微镜技术对空气中的污染物及其它颗粒进行观察分析时使用。 Isopore 表面滤膜具有光滑的,像玻璃一样的表面,可以进行清晰的样品观察。

Millipore聚碳酸酯过滤膜(PC膜径迹蚀刻膜)8um孔径TETP04700说明:Isopore 表面滤膜,聚碳酸酯,亲水,8.0 µm,47 mm,白色,光面
商标名:Isopore
数量/包装:100
滤膜材质:Polycarbonate
滤膜商标名:Isopore
折射率:1.6
zui高操作温度,°C:140
滤膜类型:表面滤膜
滤膜孔径,µm:8.0
可润湿性:亲水
滤膜直径,mm:47
Air Flow Rate, L/min x cm2/psi:60
Water Flow Rate, mL/min x cm2/psi:250
滤膜代码:TETP
滤膜颜色:白色
产品名称:Isopore 表面滤膜
滤膜表面:光面
重量分析溶出物,%:<1
厚度,µm:20
孔隙率 %:5–20

millipore13mm有机针头滤器SLGVX13NL现货供应,0.22um PVDF针头滤器SLGV013NL

millipore13mm有机针头滤器SLGVX13NL现货供应,0.22um PVDF针头滤器

简要描述:
millipore13mm有机针头滤器SLGVX13NL现货供应,0.22um PVDF针头滤器。Millex-GV针头滤器,13mm直径,0.22um孔径,PVDF有机系,100个一盒,未灭菌。slgv013nl。

millipore13mm有机针头滤器SLGVX13NL现货供应,0.22um PVDF针头滤器

描述:Millex-GV Filter, 0.22um, PVDF, 13 mm, non-sterile

商标名:Millex

数量/Pk:100

millipore13mm有机针头滤器SLGVX13NL现货供应,0.22um PVDF针头滤器应用:Preparation of protein-containing solutions prior to chromatography or other instrument analyses

进口接头:Female Luer-Lok®

zui大进口压力, bar (psi):10 (150)

Bubble Point at 23 °C:≥3.4 bar, air with waterProcess

残留体积, mL:≤10

孔径 (um):0.22

Wettability:Hydrophilic

Housing:PolypropyleneSample

Type:Aqueous Mild OrganicFilter

Diameter (mm):13

Filter Code:GV

Product Name:Millex-GV

Filter UnitFiltration Area, cm?:0.8

Sterility:Non-Sterile

Device Material:Polypropylene

Connections, Inlet/Outlet:Female Luer-Lok/Male Luer slip

Chemistry:Hydrophilic PVDF

Color Code:Yellow

Media:Durapore®

Direct Patient Care Y/N:N

Fitting Outlet:Male Luer slip

Maximum Operating Temperature, °C:45

Hold-up Volume, uL:≤15 after air purge

Diameter, mm:13

Height, mm:21

PALL(颇尔)142mm聚醚砜(PES)过滤膜60305现货供应,PALL 60305过滤膜价格60305

PALL(颇尔)142mm聚醚砜(PES)过滤膜60305现货供应,PALL 60305过滤膜价格

简要描述:
PALL(颇尔)142mm聚醚砜(PES)过滤膜60305现货供应,PALL 60305过滤膜价格。过滤介质:亲水性聚醚砜。孔径:0.1,0.2,0.45,0.8μm。直径:13至293μm

PALL(颇尔)142mm聚醚砜(PES)过滤膜60305现货供应,PALL 60305过滤膜价格

减少过滤时间;极适用于生物制药和除菌过滤
PALL(颇尔)142mm聚醚砜(PES)过滤膜60305现货供应,PALL 60305过滤膜价格特点:
• 的流速和处理量提高了过滤速度。
• 蛋白吸附低,兼容性好。
• 高处理量节省时间和经费。
• 产品经伽玛射线灭菌,可高温高压灭菌。
订货信息:

Part Number Description Pkg CN
Supor 100 Membrane Disc Filters, 0.1 µm
60309 25 mm, plain 100/pkg
60310 47 mm, plain 100/pkg
60311 90 mm, plain 100/pkg
60312 142 mm, tabbed 25/pkg
66551 142 mm, no tab 25/pkg
60313 293 mm, tabbed 25/pkg
66552 293 mm, no tab 25/pkg
Supor 200 Membrane Disc Filters, 0.2 µm
60298 13 mm, plain 100/pkg
60300 25 mm, plain 100/pkg
60301 47 mm, plain 100/pkg
66234 47 mm, grid, individual sterile pack (S-Pack) 200/pkg
60334 90 mm, plain 100/pkg
66549 142 mm, no tab 25/pkg
60305 142 mm, tabbed 25/pkg
60307 293 mm, tabbed 25/pkg
66550 293 mm, no tab 25/pkg
Supor 450 Membrane Disc Filters, 0.45 µm
60170 13 mm, plain 100/pkg
60172 25 mm, plain 100/pkg
60173 47 mm, plain 100/pkg
61854 47 mm, grid 100/pkg
60043 47 mm, grid, individual-gamma irradiated pack (S-pack) 200/pkg
60174 50 mm, plain 100/pkg
60206 90 mm, plain 100/pkg
60177 142 mm, tabbed 25/pkg
66553 142 mm, no tab 25/pkg
60179 293 mm, tabbed 25/pkg
66554 293 mm, no tab 25/pkg
Supor 800 Membrane Disc Filters, 0.8 µm
60109 25 mm, plain 100/pkg
60110 47 mm, plain 100/pkg
65472 47 mm, grid, sterile 200/pkg
60112 90 mm, plain 100/pkg
60114 142 mm, tabbed 25/pkg
66555 142 mm, no tab 25/pkg
60116 293 mm, tabbed 25/pkg
66556 293 mm, no tab 25/pkg

Mitex表面滤膜LSWG04700价格,疏水性PTFE白色网格滤膜LSWG04700现货供应LSWG04700

Mitex表面滤膜LSWG04700价格,疏水性PTFE白色网格滤膜LSWG04700现货供应

简要描述:
Mitex表面滤膜LSWG04700价格,疏水性PTFE白色网格滤膜LSWG04700现货供应。Mitex 是一种没有支撑物的疏水性 PTFE 膜。 可用于其它膜不能承受的的化学或温度条件下使用(Z高 260 ° C)。

Mitex表面滤膜LSWG04700价格,疏水性PTFE白色网格滤膜LSWG04700现货供应

说明:Mitex 表面滤膜,PTFE,疏水,5.0 um,47 mm,白色,网格

商标名:Mitex

数量/包装:100

滤膜材质:Hydrophobic PTFE

水通量,mL/min x cm2:51.9

23 °C 时的泡点:≥0.05 bar

zui高操作温度,°C:260

滤膜类型:表面滤膜

滤膜孔径,um:5.0

可润湿性:疏水

滤膜直径,mm:47

滤膜代码:LSWG

滤膜颜色:白色

产品名称:Mitex 表面滤膜

滤膜表面:网格

厚度,um:170

空气流速,L/min x cm2:9

孔隙率 %:60

灭菌方法:高温高压灭菌 (121 °C,1 bar)或 EO

细菌内毒素:0.5 EU/mL

重量 溶出物:< 0.5%

国产25mm全玻璃过滤器FB-04T(漏斗容量30ml)现货供应,25mm溶剂过滤器FB-04T

国产25mm全玻璃过滤器FB-04T(漏斗容量30ml)现货供应,25mm溶剂过滤器

简要描述:
国产25mm全玻璃过滤器FB-04T(漏斗容量30ml)现货供应,25mm溶剂过滤器。直径25mm滤膜溶剂过滤组件。过滤瓶:1、优质特硬玻璃材料;2、制作精美、壁厚均匀;3、耐压性好;4、标准尺寸,互换性好,可与国外多种品牌互配。 5、过滤瓶包括:滤杯(30ml)、中间过滤头、抽滤瓶、铝合金夹子。

国产25mm全玻璃过滤器FB-04T(漏斗容量30ml)现货供应,25mm溶剂过滤器

直径25mm滤膜溶剂过滤组件

过滤瓶
•优质特硬玻璃材料 
•制作精美、壁厚均匀 
•耐压性好 
•标准尺寸,互换性好,可与国外多种品牌互配。 
•过滤瓶包括:滤杯(30ml)、中间过滤头、抽滤瓶、铝合金夹子,接收瓶500ml
 
 
 

Millipore玻璃纤维滤膜0.7um(不含粘合剂)AP4004700ap4004700

Millipore玻璃纤维滤膜0.7um(不含粘合剂)AP4004700

简要描述:
Millipore玻璃纤维滤膜0.7um(不含粘合剂)AP4004700。不含黏合剂树脂的过滤膜在加热到 500 °C 时依然可以维持结构的完整性,而且不会损失重量,因此可用于重量分析及热气低过滤。

Millipore玻璃纤维滤膜0.7um(不含粘合剂)AP4004700

Millipore 纤维圆片滤膜具有广泛的流速范围和承载能力。 玻璃纤维滤膜含有或不含黏合剂树脂的形式,可通过 EO、 γ 射线或高温高压灭菌(121 °C,1 bar)。

说明: 不含黏合剂的玻璃纤维膜,AP40,47 mm

数量/包装: 100

滤膜材质: Glass Fiber

水通量,mL/min x cm2: 6

滤膜类型: 深层滤膜

zui高操作温度,°C: 550

滤膜孔径,µm: 0.7

可润湿性: 亲水

滤膜直径,mm: 47

滤膜代码: AP40

滤膜颜色: 白色

产品名称: 玻璃纤维膜

滤膜表面: 光面

厚度,µm: 475

 

Millipore玻璃纤维滤膜0.7um(不含粘合剂)AP4004700:

  • 建议供“标准方法总悬浮颗粒 2540D”使用
     
  • 建议用于“USEPA 方法 1311 ”进行的 TCLP 分析
     
  • 样品过滤后,当滤膜灼热到 550 °C (1022 °F) 时,滤膜仍能保持结构完整而无任何重量损失
     
  • 建议用于测定污水和工业废水中的挥发性悬浮物质

Pallflex过滤膜7212优势代理,Pallflex过滤膜7212价格7212

Pallflex过滤膜7212优势代理,Pallflex过滤膜7212价格

简要描述:
Pallflex过滤膜7212优势代理,Pallflex过滤膜7212价格。直径:47mm;包装:50PK;过滤介质:带有碳氟涂层的硼硅玻璃纤维;厚度:203um;重量:3.4 mg/cm2;空气流速:180 L/min/cm2;Z高操作温度:315.5摄氏度

Pallflex过滤膜7212优势代理,Pallflex过滤膜7212价格

Fiberfilm™ Filters

  • Economical filter suited for a range of air sampling applications. 
  • Moisture variations in air or gases during air sampling will not cause chemical reactions on the filter.
  • Heat-treated (HT) version available for reduction of trace organics.

Fiberfilm 过滤膜

货号

说明

包装

7210

T60A20, 25 mm

100/pkg

7211

T60A20, 37 mm

50/pkg

7212

T60A20, 47 mm

50/pkg

7216

T60A20, 55 mm

50/pkg

7213

T60A20, 70 mm

50/pkg

7209

T60A20-HT, 70 mm

50/pkg

7214

T60A20, 90 mm

50/pkg

7257

T60A20, 100 mm

50/pkg

7215

T60A20, 8 x 10 in.

50/pkg

 

 

Description Tissuquartz Filters Emfab Filters* Fiberfilm Filters
Filter Media Pure quartz, no binder Borosilicate glass microfibers reinforced with woven glass cloth and bonded with PTFE Heat resistant borosilicate glass fiber coated with fluorocarbon (TFE)
Diameter 25 – 142 mm and 8 x 10 in. 12 – 142 mm and 8 x 10 in. 25 – 100 mm and 8 x 10 in.
Typical Thickness 432 µm (17 mils) 178 µm (7 mils) 203 µm (8 mils)
Typical Filter Weight 5.8 mg/cm2 5.0 mg/cm2 3.4 mg/cm2
Typical Water Flow Rate
0.35 bar (35 kPa, 5 psi)
220 mL/min/cm2 32 mL/min/cm2 220 mL/min/cm2
Typical Air Flow Rate
0.7 bar (70 kPa, 10 psi)
73 L/min/cm2 68 L/min/cm2 180 L/min/cm2
Maximum Operating Temperature – Air 1093 ºC
(2000 ºF)
260 ºC
(500 ºF)
315.5 ºC
(600 ºF)
Typical Aerosol Retention** 99.90% 99.95% 96.40%
pH in Boiled Water Extract 6.5 – 7.5
 

* The TX40HI45 and TX40HI75 are made from the same materials but were developed in conjunction with the U.S. EPA (Method 26) when a need arose to sample the exhaust gases from the stacks at incinerator facilities. These two grades are made with higher levels of the PTFE binder resin than the TX40HI20WW to withstand the corrosive atmosphere. The TX40HI75 has a higher level of binder than the TX40HI45 and both have a higher level than the TX40HI20WW.

 

书签和分享X

在XYZ浏览器中更方便的使用AddThis服务。

 

 不再显示此内容电子信箱收藏夹FacebookTwitterDiggDeliciousBloggerLinkedIn

 

AddThisSettings隐私策略