Dionex IonPac Fast Anion IIIA Column 阴离子交换色谱柱

Dionex IonPac Fast Anion IIIA Column 阴离子交换色谱柱



型号 美国戴安 P/N: 062964

IonPac Fast Anion IIIA Hydroxide-Selective Anion-Exchange Column

Rugged and Reliable Column for Rapid Determination of Phosphoric and Citric Acids in Colas

This hydroxide-selective anion-exchange column is specifically designed for the determination of phosphoric and citric acids in cola soft drinks. Its capacity and selectivity allows rapid analysis of these acids in less than 7 minutes.

  • Use with the Eluent Generator for simplified Reagent-Free IC operation.
  • The 3 mm i.d. configuration provides economical operation.
  • Combine with the ASRS? 300 suppressor for low background and enhanced sensitivity.
  • Compatible with organic solvents.

The Fast Anion IIIA is optimized for a 30 °C operating temperature to ensure reproducible retention times in all environmental conditions. It is compatible with organic solvents to enhance analyte solubility, modify column selectivity, or allow effective column cleanup. The Fast Anion IIIA column is recommended for use with the Eluent Generator, requiring only a deionized water source to produce potassium hydroxide eluent.

The cola samples may require sample pretreatment with sonication to remove carbonation. Sample dilution of cola syrups is recommended prior to analysis to ensure optimum column life. These acids can be analyzed in less than 7 minutes using an isocratic potassium hydroxide eluent delivered by an Eluent Generator in combination with suppressed conductivity detection.

IonPac Fast Anion IIIA Anion-Exchange Column Specifications
Dimensions IonPac Fast Anion IIIA Analytical Column:
3 × 250 mm IonPac Fast Anion
IIIA Guard Column:
3 × 50 mm
phase compatibility pH 0–14; 0–100% HPLC solvents
Ion-exchange group Functional Group: Alkanol quaternary ammonium ion
Maximum operating pressure 3000 psi
Functional group characteristics Hydrophobicity: Ultralow hydrophobic
Capacity 55 ?eq (3 × 250 mm analytical column)
1.0 ?eq (3 × 50 mm guard column)
Column construction PEEK with 10-32 threaded ferrule style end fittings.
All components are nonmetallic.
Substrate characteristics Bead Diameter and Pore Size:
7.5 ?m (3 × 250 mm); supermacroporous resin (2000 ?)
11 ?m (3 × 50 mm); microporous resin (<10 ?)
Cross-Linking (%DVB): 55%

Analytical Columns
IonPac Fast Anion IIIA Analytical Column (3 x 250 mm) 062964
Guard Columns
IonPac Fast Anion IIIA Guard Column (3 x 50 mm) 062966